Strip Heaters

Designed to Meet the Demands
Our line of strip heaters are made to exacting standards for efficient heat transfer and easy installation. Many constructions and configurations are available to fit almost any application (see descriptions below). Plus, we can supply custom strip heaters per your specifications. Purchase the best strip heaters.

Better^® Strip Heaters Specifically designed for long life and a higher watt density operation. Each is able to sustain higher operating temperatures to meet the demands of the new engineering materials. Maximum watt densities; far in excess of other style strips. Highest application temperatures available. Low expansion characteristics minimize movement away from block on applications not utilizing full clamping plate. Longest life available and the resulting reduction of equipment downtime. Highest heat transfer rates and fast heat-up. Reduces number and physical size of heaters for many applications. The only ceramic strip heater readily available in special widths, lengths, wattages, voltages, and configurations. Packaging: Sold individually.

Sealed Better^® Strip Heaters Similar to the Better^® Strip in its ability to withstand high watt densities and high operating temperatures. In addition, its sheath has further protection from most contaminants, allowing for even greater durability. Specifically designed sheath prevents most contaminants. Maximum watt densities; far in excess of other style strips. Low expansion characteristics minimize movement away from block on applications not utilizing full clamping plate. Highest application temperatures available. Longest life available and the resulting reduction of equipment downtime. Highest heat transfer rates and fast heat-up. Reduces number and physical size of heaters for many applications. Packaging: Sold individually.

Ceramic Strip Heaters
Quality materials are used to provide high sheath temperatures. The heater consists of a stainless steel tube containing a high temperature ceramic insulating a nickel-chrome wire coil to provide a clean, dependable, versatile and efficient heat source for a wide range of applications. Magnesium oxide is used to fill all voids thus providing the best heat transfer.

Simple-to-wire stainless steel screw terminals are securely anchored to prevent twisting out under normal conditions. Many terminal variations are available including waterproofing. Standard strip heater dimensions are 5/16" thick and 1½" wide, and are available in many lengths.

Packaging: Sold individually.

Finned Strip Heaters
Designed to provide excellent heat transfer to air. Fin strip heaters are available in a full range of sizes, wattages and voltage ranges. Typical applications for finned strip heaters include duct heaters, space heaters, drying ovens, and shrink tunnels.

Available in Ultima^® or Ceramic.

Packaging: Sold individually.

CERAMIC FINNED STRIP HEATERS
PART NO.	O.A.L.	VOLTS	WATTS
RL020252	10-1/2"	120	725
RL020223	10-1/2"	240	725
RL020385	12"	120	900
RL020383	12"	240	900
RL020386	14"	120	1100
RL020064	14"	240	1100
RL020228	15-1/4"	120	1250
RL020387	15-1/4"	240	1250
RL020388	17-7/8"	120	1550
RL020233	17-7/8"	240	1550
RL020389	19"	120	1700
RL020390	19"	240	1700
RL020391	21"	120	1900
RL020392	21"	240	1900
RL020533	23-3/4"	120	2200

CERAMIC FINNED STRIP HEATERS
PART NO.	O.A.L.	VOLTS	WATTS
RL020309	23-3/4"	240	2200
RL020394	25-1/2"	120	2400
RL020395	25-1/2"	240	2400
RL020396	26-3/4"	120	2500
RL020397	26-3/4"	240	2500
RL020398	30-1/2"	120	2800
RL020015	30-1/2"	240	2800
RL020399	33-1/2"	120	3150
RL020400	33-1/2"	240	3150
RL020401	35-7/8"	120	3450
RL020326	35-7/8"	240	3450
RL020402	38-1/2"	120	3700
RL020323	38-1/2"	240	3700
RL020403	42-1/2"	120	4150
RL020179	42-1/2"	240	4150

Terminal Position on all heaters in across the width of the heater.

Ultima^® Strip Heaters
1200°F Continuous Operation. Designed to withstand most corrosive environments, the Ultima's performance is above and beyond the norm. Constructed of heavy duty seamless stainless steel with welded stainless steel end caps, which results in a highly contamination and corrosion resistant heater. This seamless stainless steel construction eliminates distortion and deformation problems associated with higher temperatures that are common with other types of heaters. Cross section of the heater is 1½" x 3/8" with fully rounded corners.

Standard Ultima^® Strip Heaters are manufactured to 40W/in² heat capacity and 240 volt rating. In this manner tandem Ultima^® strips or bands can be wired to 240 or 480 volt sources. These heaters can operate up to 1200°F continuous operation with one of the highest dielectric properties attainable in industrial applications today. Applications include: film die head heating, platen and vacuum forming machinery.

Packaging: Sold individually.

Permaheat^® Strip Heaters Excellent performance due primarily to its rugged construction. The elements are placed in a precisely extruded aluminum base. The aluminum body also serves as an excellent transfer medium for rapid heat-up while providing a uniform temperature throughout. Energy efficient and built to last. Packaging: Sold individually.

PS&E strip heaters are comparable with the followings brands: BH Thermal, Chromalox, CCI Thermal, Delta, DME, Durex, E-Z Heat, Fast HEat, George Ulanet, Hampton, Heater Controls, Heatrex, Heatron, Hot Set, Hotwatt, Industrial Heater, ITC, JAW, Marathon, Minco, OEM, Ogden, Omega, PPE, Precision Control, Pro Heat, Protherm, Seema, Tempco, Thermacraft, Therma Tech, Thermal, Thermx, Tru Heat, Ulanet, Vulcan, Waage Electric, Watlow, Wattco.