PLASTIC SERVICES
& EQUIPMENT

Home  |  Products   |  Brands  |  Place An Order  |  Request A Quote  | Promotions  |  Site Map  |  Search  |  Contact Us

 


Air-Cooled

Portable Chillers (CF-A Series)





 

The CF-A Series Portable Chiller provides precise temperature control 
from an economically affordable and reliable unit. Perfect for plastic injection 
molding, blow molding, extrusion and other industrial applications.

 

Features:

  • 1/4 to 40 Tons Capacity
  • Single Zone
  • Microprocessor Control
  • Process Temperatures from 20 F to 65 F
  • Brazed Plate Evaporator
  • Galvanized Steel Construction
  • Hermetic Compressor
  • Insulated Internal reservoir
  • Large temperature Display in F and C

An economical and reliable unit for heat exchange, the CF-W Series (Water-cooled) and CF-A (Air-Cooled) Portable Chillers utilize a single refrigerant zone with a compressor and evaporator, along with an insulated reservoir and a coolant pump.  The Air-cooled models (CF-A) use fans or blowers to move ambient air across the condenser.

Chiller control instrumentation on the units include; microprocessor controller, large temperature and machine status displays, power, coolant pump and compressor status indicators, and on/off rocker switch.

Each unit has a coolant freezestat, compressor motor overload protection, refrigerant high and low pressure switches, and instrument control circuit fuse for safety.

The major benefits of the CF-A Series Portable Chillers are recommended for applications where inadequate or contaminated water supplies exist, or where heat recovery for supplemental heating is desired.







CF-A Portable Chillers (Air-Cooled)







CF-A SERIES
Air-Cooled
  4A 5A 7.5A 10A 15A-FC 15A 20A-FC 25A 30A
COMPRESSOR CAPACITY 1 4.0 5.0 7.5 10.0 15.0 15.0 20.0 24.0 26.0
HP 4.0 5.0 7.5 10.0 15.0 15.0 10.0 12.0 15.0
QUANTITY 1 1 1 1 1 1 2 2 2
TYPE 2 H H H H H H H H H
PROCESS
PUMP
HP .750 2.0 2.0 2.0 3.0 3.0 3.0 5.0 5.0
GPM 8.4 12.0 18.0 24.0 36.0 36.0 48.0 60.0 72.0
PSI 38 63 58 57 58 58 55 59 57
CONNECTION
SIZES
PROCESS 1" 1-1/4" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 1-1/2" 2" 2"
CONDENSING 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2"
AIR-COOLED
CONDENSER
TYPE Fan Fan Fan Fan Fan Blower Fan Blower Blower
MOTOR QUANTITY 1 1 2 2 1 1 1 1 1
MOTOR HP .750 .750 .750 .750 3.0 7.5 5.0 15.0 20.0
CFM 5000 5000 10000 10000 15000 15000 20000 25000 30000

SP 3

N/A N/A N/A N/A 1.35 N/A N/A 1.35 1.35
REFRIGERANT (Type HCFC) 22 22 22 22 22 22 22 22 22
RESERVOIR CAPACITY (Gallons) 25 25 25 25 65 65 65 65 65
FULL LOAD
AMPERAGE 4
230/3/60 25 30 45 52 74 90 102 158 178
460/3/60 12 15 23 26 37 45 51 79 89
575/3/60 10 12 19 21 30 36 41 64 72
DIMENSIONS HEIGHT 60" 60" 60" 60" 96" 96" 96" 96" 96"
WIDTH 34" 34" 34" 34" 58" 58" 58" 58" 58"
DEPTH 40" 40" 56" 56" 70" 70" 70" 70" 70"
WEIGHT 600 lbs 700 lbs 1250 lbs 1300 lbs 1790 lbs 1790 lbs 2100 lbs 2300 lbs 2400 lbs
1 Tons Capacity at 12,000 BTU/ton @ 50F LWT @ 105 F Condensing Temperature. (Capacity may be +/- 5%)
2 H- Hermetic compressor,  S - Semi-Hermetic Compressor
3 Static Pressure in inches of water
4 Full Load Amperage shown. No allowance for in-rush. Full Load Amps are higher than Run Load Amps and must be used for sizing disconnects and supply wiring.







Your Next Barrel or Screw Is On Our Shelf...
Call Today! 800-627-1033

Home | Request A Quote | Place An Order | Product Index 
Barrels & Screws | Electrical Products | Hose & Fittings | Molding Accessories 
About PS&E
| Terms & Conditions | Credit Application
Contact Us | Request A Catalog | Online Catalog


PLASTIC SERVICES & EQUIPMENT


Fax:  800-482-4059
| E-mail:  sales@servicesforplastics.com | Address:  7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Contact Webmaster regarding content or link problems.
Copyright 1997 - 2017 Plastic Services & Equipment. All rights reserved.