PLASTIC SERVICES
& EQUIPMENT

Home  |  Products   |  Brands  |  Place An Order  |  Request A Quote  | Site Map  |  Contact Us

 

Air/Water/Oil


Manifolds

INLINE

Inline Manifolds

 

 

SIDELINE
(Divided)

Red/Blue Divided Manifold

 

Rugged, Quick Connect External Manifolds 
Offer You Exceptional Convenience, 
Cost and Production Advantages

 

quickQUOTE

     For price quotation and delivery - click on the 
Quick Quote
link above or call us at 1-800-627-1033


FEATURES:

  • Color Coded - Hoses and Manifolds are Color Coded (Red for Hot and Blue for Cold) for Easy Identification (And To Help Eliminate Hookup Errors)
  • Fewer Connections - Reduces Chances of Hookup Errors
  • Variety of Models - Standard or Custom — Virtually Unlimited Combinations Available — We Can Accommodate Almost Any Cooling Pattern
  • Full Flow - For Optimum Efficiency
  • External Mounting - Provides Thermal Barrier Between Mold and Manifold
  • Port Size Selection - May Be Sized for Foolproof Connections (No Accidental Hookup of Cold to Hot or
    Hot to Cold)
  • Pre-Plumbing - Permits Bench Testing of Flow Rates and Checks for Mold Leaks

Men with Manifolds

 

GENERAL SPECIFICATIONS:

  • Manifolds are in stock or custom drilled to your specifications.
  • Either separate single manifolds may be used for the supply and return flow; or a divided manifold with a divider plate may be used for both the supply and return flow.
  • Manifolds have pre-drilled mounting holes and are furnished with stainless steel mounting screws.
  • Ports can be drilled in from 1 to 5 surfaces - A, B, C, D, and/or E (see drawing A). Custom spacing is available.
  • Manifolds are made from 356 aircraft aluminum.
  • Single manifolds are available in red, blue or black. Divided manifolds are half blue and half red.

Pressure Rating: 3000 psi

Temperature Rating: 300°F

DRAWING A

Five-Sided ABCDE Manifold Drawing

 

M3 Manifold

SPECIFICATIONS:

  • Available in lengths from 2¾".
  • Made from 1¾" x 1¾" stock.
  • Inlet ports are ¾ NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
  • Outlet ports can be 1/8 or 1/4 NPT.
  • Ports are spaced 1" apart. Custom spacing is also available.
  • Supplied with 10-32 x 1½" mounting bolt.
  • -123 O-rings fit End Cap.

More Info on M3 Manifolds

 

M4 Manifold

SPECIFICATIONS:

  • Available in lengths from 3¾".
  • Made from 2" x 2" stock.
  • Inlet ports are 1 NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
  • Outlet ports can be 1/4 or 3/8 NPT.
  • Ports are spaced 1¼" apart. Custom spacing is also available.
  • Supplied with ¼-20 x 2" mounting bolt.
  • -220 O-rings fit End Cap.

More Info on M4 Manifolds

M6 Manifold

SPECIFICATIONS:

  • Available in lengths from 6".
  • Made from 3" x 3" stock.
  • Inlet ports are 1½ NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
  • Outlet ports can be 1/4, 3/8, 1/2, or 3/4 NPT.
  • Ports are spaced 2" apart. Custom spacing is also available.
  • Supplied with ¼-20 x 2½" mounting bolt.
  • -226 O-rings fit End Cap.

More Info on M6 Manifolds

 

M8 Manifold

SPECIFICATIONS:

  • Available in lengths from 8".
  • Made from 3½" x 3½" stock.
  • Inlet ports are 2 NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
  • Outlet ports can be 1/2, 3/4, or 1 NPT.
  • Ports are spaced 2½" apart. Custom spacing is also available.
  • Supplied with ¼-20 x 3" mounting bolt.
  • -230 O-rings fit End Cap.

More Info on M8 Manifolds

 

 



Manifolds with Special Spacing:

Manifolds can be ordered with special 2½" port spacing to mount ball valves for positive shut-off.

FEATURES:

  • Use to mount pressure and temperature gauges for peak performance
  • Top quality - low cost
  • Reduce hose lengths and setup time
  • Will not rust

Inline Manifold w/Shut-Off Valves

GENERAL SPECIFICATIONS:

  • Manifolds are in stock or custom drilled to your specifications.

  • Either separate single manifolds may be used for the supply and return flow (see drawing A); or a divided manifold with a divider plate may be used for both the supply and return flow (see drawing B).

  • Manifolds have pre-drilled mounting holes and are furnished with stainless steel mounting screws.

  • Ports can be drilled in from 1 to 5 surfaces - A, B, C, D, and/or E (see drawing C). Custom spacing is available.

  • Manifolds are made from 356 aircraft aluminum.

  • Single manifolds are available in red, blue or black. Divided manifolds are half blue and half red.

Pressure Rating: 3000 psi

Temperature Rating: 300°F

 

 

 

 

Our manifolds are comparable with the following brands: A1, Airtx International, Alco, Alkon, Amity Machine, Alumni-Tec, ASCO, Atlas, Ausco, B&R, Bandotherm, Banjo, Bauer, Beco, Birmingham, Bosch, Burger & Brown, CITO Products, Cross Fluid, Daman, DK-Lok, DME, EHA, EMI, Enerpac, Fairchild, Forward Industries, Gar-Kenyon, Harris, Heitec, Hydac, Hydo-Fitting, INCOE, IPT, JP Solutions, Kedron, Kor-Lok, Linfor, Lynch, Magnaloy, Mastip, Mead, Med-Kas, Parker, Parker-Hannifin, PGI, Pisco, Pneumadyne, Pneudraulics, PPE, REO, Ross Controls, Saicad, Selling Precision, Stover, Techno-Jet, Tri Flo, Valve Check, Vektek, Vonberg.


Your Next Barrel or Screw Is On Our Shelf...
Call Today! 800-627-1033

Home | Request A Quote | Place An Order | Product Index 
Barrels & Screws | Electrical Products | Hose & Fittings | Molding Accessories 
About PS&E
| Terms & Conditions | Credit Application
Contact Us | Online Catalog


PLASTIC SERVICES & EQUIPMENT


Fax:  800-482-4059
| E-mail:  sales@servicesforplastics.com | Address:  7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Contact Webmaster regarding content or link problems.
Copyright 1997-2024 | Plastic Services & Equipment. | All rights reserved. | Privacy Policy