Rugged, Quick Connect External Manifolds 
Offer You Exceptional Convenience, 
Cost and Production Advantages

FEATURES:

• Color Coded - Hoses and Manifolds are Color Coded (Red for Hot and Blue for Cold) for Easy Identification (And To Help Eliminate Hookup Errors)
  
• Fewer Connections - Reduces Chances of Hookup Errors
  
• Variety of Models - Standard or Custom — Virtually Unlimited Combinations Available — We Can Accommodate Almost Any Cooling Pattern
  
• Full Flow - For Optimum Efficiency
  
• External Mounting - Provides Thermal Barrier Between Mold and Manifold
  
• Port Size Selection - May Be Sized for Foolproof Connections (No Accidental Hookup of Cold to Hot or
  Hot to Cold)
  
• Pre-Plumbing - Permits Bench Testing of Flow Rates and Checks for Mold Leaks
  

• Manifolds are in stock or custom drilled to your specifications.
  
• Either separate single manifolds may be used for the supply and return flow (see drawing A); or a divided manifold with a divider plate may be used for both the supply and return flow (see drawing B).
  
• Manifolds have pre-drilled mounting holes and are furnished with stainless steel mounting screws.
  
• Ports can be drilled in from 1 to 5 surfaces - A, B, C, D, and/or E (see drawing C). Custom spacing is available.
  
• Manifolds are made from 356 aircraft aluminum.
  
• Single manifolds are available in red, blue or black. Divided manifolds are half blue and half red.

Pressure Rating: 3000 psi

Temperature Rating: 300°F

M3 Manifold

SPECIFICATIONS:

• Available in lengths from 2¾".
• Made from 1¾" x 1¾" stock.
• Inlet ports are ¾ NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
• Outlet ports can be 1/8 or 1/4 NPT.
• Ports are spaced 1" apart. Custom spacing is also available.
• Supplied with 10-32 x 1½" mounting bolt.
• -123 O-rings fit End Cap.

More Info on M3 Manifolds

M4 Manifold

• Available in lengths from 3¾".
• Made from 2" x 2" stock.
• Inlet ports are 1 NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
• Outlet ports can be 1/4 or 3/8 NPT.
• Ports are spaced 1¼" apart. Custom spacing is also available.
• Supplied with ¼-20 x 2" mounting bolt.
• -220 O-rings fit End Cap.

More Info on M4 Manifolds

M6 Manifold

• Available in lengths from 6".
• Made from 3" x 3" stock.
• Inlet ports are 1½ NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
• Outlet ports can be 1/4, 3/8, 1/2, or 3/4 NPT.
• Ports are spaced 2" apart. Custom spacing is also available.
• Supplied with ¼-20 x 2½" mounting bolt.
• -226 O-rings fit End Cap.

More Info on M6 Manifolds

M8 Manifold

• Available in lengths from 8".
• Made from 3½" x 3½" stock.
• Inlet ports are 2 NPT, and are furnished with flush end plugs of the same size (1 plug for inline manifolds; 2 plugs for sideline manifolds).
• Outlet ports can be 1/2, 3/4, or 1 NPT.
• Ports are spaced 2½" apart. Custom spacing is also available.
• Supplied with ¼-20 x 3" mounting bolt.
• -230 O-rings fit End Cap.

More Info on M8 Manifolds

FEATURES:

• Use to mount pressure and temperature gauges for peak performance
  
• Top quality - low cost
  
• Reduce hose lengths and setup time
  
• Will not rust

• Manifolds are in stock or custom drilled to your specifications.
  

• Either separate single manifolds may be used for the supply and return flow (see drawing A); or a divided manifold with a divider plate may be used for both the supply and return flow (see drawing B).
  

• Manifolds have pre-drilled mounting holes and are furnished with stainless steel mounting screws.
  

• Ports can be drilled in from 1 to 5 surfaces - A, B, C, D, and/or E (see drawing C). Custom spacing is available.
  

• Manifolds are made from 356 aircraft aluminum.
  

• Single manifolds are available in red, blue or black. Divided manifolds are half blue and half red.

Pressure Rating: 3000 psi

Temperature Rating: 300°F