Dryer-Suction Hose

Dryer Hose
DH Series
Fiberglass/Silicone coated for hot or cold air handling, fume removal or ventilation from dryers, tanks or enclosures. Low pressure handling of gaseous materials. Resists extreme temperatures, fungi and ozone. Fair resistance to alkalis, water, oils and solvents. Very flexible at low temperatures. Odor free in hot air service.

DH-4001 Single Ply Series:
Tube: Single Ply Silicone Fiberglass
Reinforcement: Spring Steel Wire Helix
Temperature Range: -65°F to +550°F
Colors: Available in Orange Only
Sizes: Available from 3/4" to 6" I.D.
Packaging: Sold by the 12' section only

DH-2001 Double Ply Series:
Tube: Double Ply Silicone Fiberglass
Reinforcement: Spring Steel Wire Helix
Temperature Range: -80°F to +600°F
Colors: Available in Orange Only
Sizes: Available from 3/4" to 12" I.D.
Packaging: Sold by the 12' section only.

DH-4001 Single Ply			DH-2001 Double Ply
PART NO.	HOSE I.D.	WORM GEAR CLAMP	PART NO.	HOSE I.D.	WORM GEAR CLAMP
DH-4001-0075	3/4"	PSHC-10	DH-2001-0075	3/4"	PSHC-10
DH-4001-0100	1"	PSHC-12	DH-2001-0100	1"	PSHC-12
DH-4001-0125	1-1/4"	PSHC-16	DH-2001-0125	1-1/4"	PSHC-16
DH-4001-0150	1-1/2"	PSHC-20	DH-2001-0150	1-1/2"	PSHC-20
DH-4001-0175	1-3/4"	PSHC-24	DH-2001-0175	1-3/4"	PSHC-24
DH-4001-0200	2"	PSHC-28	DH-2001-0200	2"	PSHC-28
DH-4001-0225	2-1/4"	PSHC-32	DH-2001-0225	2-1/4"	PSHC-32
DH-4001-0250	2-1/2"	PSHC-36	DH-2001-0250	2-1/2"	PSHC-36
DH-4001-0275	2-3/4"	PSHC-40	DH-2001-0275	2-3/4"	PSHC-40
DH-4001-0300	3"	PSHC-44	DH-2001-0300	3"	PSHC-44
DH-4001-0325	3-1/4"	PSHC-48	DH-2001-0325	3-1/4"	PSHC-48
DH-4001-0350	3-1/2"	PSHC-52	DH-2001-0350	3-1/2"	PSHC-52
DH-4001-0375	3-3/4"	PSHC-64	DH-2001-0375	3-3/4"	PSHC-64
DH-4001-0400	4"	PSHC-64	DH-2001-0400	4"	PSHC-64
DH-4001-0500	5"	PSHC-72	DH-2001-0500	5"	PSHC-72
DH-4001-0600	6"	-	DH-2001-0600	6"	-
DH-4001-0800	8"	-	DH-2001-0800	8"	-
DH-4001-1000	10"	-	DH-2001-1000	10"	-
DH-4001-1200	12"	-	DH-2001-1200	12"	-

Insulated Dryer Hose
IDH Series
For use when heat loss is a problem.

Inner Core Duct: 2-ply Silicone/Fiberglass
Outer Duct: Black Neoprene
Insulation: 1" thick Fiberglass between inner and outer duct, fortified with an extra wrap or urethane foam. If space is a concern, ½" insulation is also available by special order.
Temperature Range: -65°F to +500°F
Colors: Available in Black Only
Sizes: Available from 1½" to 6" I.D.
Packaging: Sold by the 12' section only.

PART NO.	HOSE I.D.
IDH-0150-1	1-1/2"
IDH-0134-1	1-3/4"
IDH-0200-1	2"
IDH-0250-1	2-1/2"
IDH-0300-1	3"
IDH-0400-1	4"
IDH-0500-1	5"
IDH-0600-1	6"

Return Air Dryer Hose
RDH Series
Ideal for dryer return air, low temperature dryers, and as an economical, flexible industrial ducting.

Tube: Single-ply Neoprene Coated Fiberglass
Reinforcement: Fiberglass Cord
Temperature Range: -40°F to +350°F
Colors: Available in Black Only
Sizes: Available from 1" to 16" I.D.
Packaging: Sold by the 12' section only.

PART NO.	HOSE I.D.	WORM GEAR CLAMP
RDH-1	1"	PSHC-10
RDH-114	1-1/4"	PSHC-16
RDH-112	1-1/2"	PSHC-20
RDH-134	1-3/4"	PSHC-24
RDH-2	2"	PSHC-28
RDH-212	2-1/2"	PSHC-36
RDH-3	3"	PSHC-44
RDH-312	3-1/2"	PSHC-52
RDH-4	4"	PSHC-64
RDH-5	5"	PSHC-72
RDH-6	6"	-
RDH-7	7"	-
RDH-8	8"	-
RDH-9	9"	-
RDH-10	10"	-

Heavy Duty Suction Hose
ESH Series
If you change hose with every color change, then this economical hose is for you. Heavy duty PVC, food grade, crystal clear, clockwise-spiral, material handling hose. Designed with a corrugated construction for added flexibility and a smooth bore allowing for unrestricted flow. PVC compound complies with applicable FDA and 3A Sanitary Standards. Uses clockwise spiral double bolt clamps.

Series ESH Hose is available with or without embedded static (Grounded) wire.

Tube: PVC
Temperature Range (Grounded): +15°F to +150°F
Static Condition Service Temperature (Non-Grounded): -4°F to +150°F
Dynamic Condition Service Temperature (Non-Grounded): +14°F to +104°F
Colors: Available in Clear Only
Sizes: Available from 1" to 4" I.D.
Packaging: Sold by the 25', 50' or 100' sections only.

PART NO.	HOSE I.D.	HOSE O.D.	WORKING PRESSURE @72° (psi)	WORM GEAR CLAMP	SPIRAL BOLT CLAMP	APPROX. WT./100'
ESH1	1"	1.30"	50	PSHC-20	--	16#
ESH114	1-1/4"	1.57"	45	PSHC-20	SDBC150	22#
ESH112	1-1/2"	1.87"	45	PSHC-28	SDBC150	31#
ESH134	1-3/4"	2.09"	45	PSHC-32	SDBC2	40#
ESH2	2"	2.40"	40	PSHC-36	SDBC2	48#
ESH214	2-1/4"	2.63"	40	PSHC-40	SDBC250	57#
ESH212	2-1/2"	3.00"	35	PSHC-44	SDBC250	70#
ESH3	3"	3.56"	35	PSHC-52	SDBC3	95#
ESH4	4"	4.60"	30	PSHC-72	SDBC4	112#

Other sizes available upon request

Super Heavy Duty Suction Hose
Tigerflex® - WT and WE Series
For your vacuum loader. PVC, food grade, crystal clear, counter-clockwise spiral, material handling hose, designed with a convoluted cover for increased flexibility and a smooth bore to eliminate material build up. PVC compound complies with applicable FDA and 3A Sanitary Standards. Uses counter-clockwise spiral double bolt clamps.

Series WE is embedded with a static wire for grounding. WT does not have the static wire.

Tube: PVC
Static Condition Service Temperature: -4°F to +150°F
Dynamic Condition Service Temperature: +14°F to +104°F
Colors: Available in Clear Only
Sizes: Available from 1¼" to 4" I.D.; including 39mm, 45mm and 57mm.
Packaging: Sold by the 25', 50' or 100' sections only.

WT Series

WE Series

SERIES "WT"
PART NO.	HOSE I.D.	WORM GEAR CLAMP	SPIRAL BOLT CLAMP	APPROX. WT./100'	FULL COIL
SH114	1-1/4"	PSHC-20	SDBC150-CC	28#	100'
SH112	1-1/2"	PSHC-28	SDBC150-CC	35#	100'
SH134	1-3/4"	PSHC-32	SDBC2-CC	44#	50'
SH2	2"	PSHC-36	SDBC2-CC	56#	100'
SH214	2-1/4"	PSHC-40	SDBC250-CC	62#	100'
SH212	2-1/2"	PSHC-44	SDBC250-CC	77#	100'
SH3	3"	PSHC-52	SDBC3-CC	110#	50'
SH312	3-1/2"	PSHC-64	SDBC4-CC	147#	50'
SH4	4"	PSHC-72	SDBC4-CC	181#	50'
SH39	39mm	PSHC-28	SDBC150-CC	36#	100'
SH45	45mm	PSHC-32	SDBC2-CC	44#	50'
SH57	57mm	PSHC-40	SDBC250-CC	62#	50'

SERIES "WE"
PART NO.	HOSE I.D.	WORM GEAR CLAMP	SPIRAL BOLT CLAMP	APPROX. WT./100'	FULL COIL
SH114W	1-1/4"	PSHC-20	SDBC150-CC	33#	50'
SH112W	1-1/2"	PSHC-28	SDBC150-CC	43#	100'
SH2W	2"	PSHC-36	SDBC2-CC	58#	100'
SH214W	2-1/4"	PSHC-40	SDBC250-CC	65#	50'
SH212W	2-1/2"	PSHC-44	SDBC250-CC	89#	100'
SH3W	3"	PSHC-52	SDBC3-CC	125#	50'
SH4W	4"	PSHC-72	SDBC4-CC	193#	50'
SH39W	39mm	PSHC-28	SDBC150-CC	43#	50'
The following are sold in 20' increments
SH134W	1-34"	PSHC-32	SDBC2-CC	17#	60'
SH45W	45mm	PSHC-32	SDBC2-CC	29#	60'
SH57W	57mm	PSHC-40	SDBC250-CC	64#	60

Abrasion Resistant Suction Hose
USH Series
Polyurethane lined, abrasion resistant PVC material handling hose with counter-clockwise spiral. Convoluted cover is made with low temperature, anti-static HMW PVC compounds for sub-zero flexibility. Smooth urethane liner provides resistance to abrasion and eliminates material build up. Uses counter-clockwise spiral double bolt clamps.

Tube: PVC
Liner: Polyurethane
Static Condition Service Temperature: -40°F to +150°F
Dynamic Condition Service Temperature: +22°F to +104°F
Colors: Available in Black Only
Sizes: Available in 1½", 2", 2½" and 3" I.D.
Packaging: Sold in full coil length only.

PART NO.	HOSE I.D.	WORM GEAR CLAMP	SPIRAL BOLT CLAMP	FULL COIL
USH114	1-1/4"	PSHC-28	SDBC150-CC	100'
USH112	1-1/2"	PSHC-28	SDBC150-CC	100'
USH2	2"	PSHC-36	SDBC2-CC	100'
USH212	2-1/2"	PSHC-44	SDBC250-CC	100'
USH3	3"	PSHC-52	SDBC3-CC	50'
USH4	4"	PSHC-64	SDBC4-CC	50'

Services life may vary depending upon operating conditions
and type of material being conveyed. NOT for liquid handling use.

SFP hose is compatible with the following brands: Accuflex, Ace, Armstrong, BDI, delafield, Durodyne, Eaton, Flexcraft, gates, Goodyear, HMD/Thermoid, Jackson Industries, Kord, Kuriyama, Lab Industrial, Lincoln, Nova Flex, NRP Jones, Parker, Parker-Hannifin, Powertrack, Riverbend, Salem-Republic, Senior Flexonics, Swan Hose, TCH, Thermoid, Tifco, Tift, Titan industries, US Hose, Willcox.

Manufacturers of High-Quality
Products for the Plastics Molding Industry

SERVICES FOR PLASTICS, INC.
800-627-1033

7925 N. Clinton St., Fort Wayne, IN 46825-3113, USA
Fax: 800-482-4059 | E-mail: sales@servicesforplastics.com
Contact Webmaster regarding content or link problems
Copyright 2014. Services for Plastics, Inc. All Rights Reserved.